NYC Metro Modern Quilters Guild: Block Lotto for March: A Scrappy "Rocky Road to Kansas"!

Here's a scrappy stash-buster block for Block Lotto! Please consider doing this block in pairs - 2, 4, 6, 8 blocks. Pairs are not required, but will make it more fun and flexible for whoever wins them all (which might be YOU!). Each pair of blocks makes half of a larger four-pointed star.

It is foundation pieced and I've included both a PDF foundation to print and instructions for fast-drafting your own, if you can't or don't want to print. Before you begin sewing, please measure and make sure that what comes out of your printer is 7" square!

(Click here for link to PDF of foundation)

To draw the foundation yourself: (see photo below) Draw a 7" square. Mark a point 3" from one corner on each of its adjacent sides. Connect the two points to make a right triangle. Then connect the two points to the opposite corner. Then improvise the scrappy section lines yourself. The lines on the PDF foundation are only suggestions - just eyeball it.

The printed PDF foundation & A handrawn version - Both are fine!

Note: The foundation has a 1/2" seam allowance around the outside edge. Having assembled several collaborative quilts - in which lots of different people have pieced the blocks - I've learned that it's really helpful to have enough around the edge to square it up yourself.

Please use white or off-white fabrics for the larger (background) triangles on the sides.

Scrappy section: the fabrics are up to you! So that we get some consistency: think colorful and contrast - not all neutrals or a single color. Also, you do not need to follow the lines on the foundation paper; you can improvise so long as there are at least 5 different fabrics.

If you know how to foundation piece, just go for it! It's a single foundation: Start at the small right triangle, do the scrappy center section, then finish with the large triangles on the sides.

If you want to watch a basic video about foundation piecing: How to Foundation Paper Piece with Angela Walters (4 mins)

Here are photos of how I made my samples:

For each pair of blocks, you'll need one 4-1/2" square of fabric, cut in half on the diagonal. This will make 2 matching pieces for your center/corner triangles.

Pin one triangle to the non-printed (front) side of the foundation, right side out.

Lay a strip of contrasting fabric along the edge of the small triangle, lining up the edges. Flip the foundation over, holding the strip in place. (You can pin it, but I find that the small pieces grip the fabric pretty well.)

Sew through the foundation along the line.

Fold back the foundation along the sewing line and trim the excess to 1/4". If you have an Add-a-Quarter ruler, that's a great tool to use. (I often just trim it by hand, because I'm too lazy to get up and find my ruler.)

Flip over the foundation to the front, fold back the second strip along the seam line and press open.

I hold my foundation up to the light to align the next strip, but you may choose to trim the extra fabric, as shown in the video link above.

Repeat the process of sewing the strip on through the foundation paper on the back. In the scrappy section, you don't have to follow the lines exactly - they're just a suggestion. (You can see in my samples that the strips are not at all identical.)

Keep folding back the foundation and trimming. Here is a close up of my hand-trimming: once you get the hang of it, you don't always need the Add-A-Quarter.

Foundation piecing is sometimes called Flip-and-Sew, because you're sewing on pieces and flipping them open before adding more.

After you finish sewing on the pieces for the scrappy center section, flip the foundation over.

Background Fabric Shortcut: If you are using a reversible white/off-white fabric - such a plain - cut a 7" x 10" rectangle. Cut it in half diagonally from corner to corner. This will make two triangles generous enough to cover the side triangles without wasting a lot of fabric. Note: This shortcut only works with reversible fabrics.

Align one triangle on the front of the foundation, covering the sewing line. Pin 2-3 times along the line before sewing, as this piece is bigger and will shift.

Here is the first side triangle, sewn on, as seen from the front.

Fold back the foundation. Gently pull it back until the fold is along the seam line. You will have to tear the paper away from the scrappy strip seams in order to get to the triangle's seam line.